| HOME  | PRODUCTS  | COMPANY  | TECHNICAL DOCS  | CONTACT US  |     
    
UHP-Mic-LED-405 Ultra High Power LED Light Source for Fluorescence Microscopy
 
 

Introduction

  Based on single monolithic chip ULtra High Power LED (>32Watt) Light Source provides excellent homogenous illumination over whole field of view. The Ultra High Power LED is an effective replacement of lasers and lamps in many power demanding applications, such as fluorescence microscopy,photostimulation (e.g. uncaging) and numerous others.

  This new member of the modular Optiblocks family provides
>2.1 Watt of collimated LED power on its output and can be used with a full range of other optical OptiBlocks such as Fiber Coupler, Liquid Light Guide coupler, Beam Combiner, Filter Wheel, Beam Switcher and others.

  Please see full list of Optional Accessories

  The LED driver supports CW or TTL triggered operation as well as optional analog input and USB control

  See other Ultra-High-Power-LED wavelengths

Ultra-High-Power-Microscope-LED-405nm
 
Ultra-High-Power-Microscope-LED-405nm
 
 
 

Key features

  • Compatible with Prizmatix modular Microscope-LED Light Source products family
  • Fiber coupler available
  • Liquid Light Guide available
  • Single chip Ultra High Power LED
  • Optically isolated TTL input for external triggering
  • LED spectrum can be narrowed by optional band pass filter
  • Excellent for fluorescence excitation
  • Stable precisely adjustable power
  • Long life (no lamp or laser tube replacement required)
  • Speckle free
  • Rapid warm up time
 
 

Applications

  • Fluorescence Microscopy: Alexa 405, DyLight 405
  • Whole body imaging of small animals in-vivo
  • Photo activation (PA) and uncaging
  • Fluorescence recovery after photo bleach (FRAP)
  • Inspection
  • Bio analysis
  • Machine vision
 
 

Optical Specifications

 
 
  
Wavelength nm 405
Wavelength range nm ±5
Spectrum half width nm 15
Collimated optical power output mW >2100
Beam Aspect Ration 1:1.78
                         
 
 

Benchtop LED Controller Specifications


 
   Features:
  • Constant current or chopping modes
  • Precise LED current setting by 10 turn dial
  • TTL external trigger input
  • Compact and robust enclosure
  • Analog Input (Optional)
  • USB interface to computer control (Optional)
  
Digital modulation input Optically isolated TTL
Connector fo TTL input BNC
Digital modulation frequency Hz DC-30000
Rise /Fall time (10%-90%) µs 6
ON /OFF extinction ms >106:1
Input Voltage V 12
Max Input current A 5.5
Power Adaptor Input 100-240 VAC, 50-60Hz,1.5A
 
 

General Specifications

 
 
  
Operation temperature range 0C 10-35
Storage temperature range 0C -10-55
Operative relative humidity (Non condensing) % <90
Head dimensions See drawing below
Head weight g 500
Controller dimensions (LxWxH) 220mm x 165mm x 51.5mm
Controller weight g 700
Power adaptor dimensions (LxWxH) 146mm x 76mm x 44mm
Power adaptor weight g 600
Fan noise dBA 38
 
 

Performance

 
 
UHP-Mic-LED-405nm
UHP-Microscope-LED-405 Spectrum
 
 

Optional Accessories

 

 
Filter Wheel:
  The UHP-Mic-LED can be equipped with a 6 positions filter wheel at the beam output. This accessory is especially useful for UHP-Mic-LED-White light source. For more details please see http://www.prizmatix-led.com/Optics/filter-wheel.htm
 
  Fibre Couppled Adapator:
  The UHP-Mic-LED can be easily changed from direct microscope coupling to fiber coupled LED configuration by means of Fiver Coupled Adaptor (SMA,CF or ST connector).This adaptor can be easily assembled by a user on the Mic-LED output. For more details please see video clip

 
Liquid Light Guide Adaptor:
  The Microscope-LED can be easily changed from direct microscope coupling to Liquid Light Guide coupled LED configuration by means of LIGA Adaptor.This adaptor can be easily assembled by a user on the Mic-LED output. For more details please see video clip
 
Collimator:
  The output from optical fiber is divergent according to fiber NA. In order to reduce the divergent angle a collimator module can be used. Prizmatix collimator was especially designed to fit thick core high NA Polymer Optical Fivers. For more details please see http://www.prizmatix-led.com/optics/collimator.htm
 
Fiber Bundles::
  To combine output of multiple LEDs a Y-shaped fiber bundle with two or more input branches can be used. Prizmatix can help to configure and build custom fiber bundles for specific applications.For more details please see
 
 

Mechanical drawings


 

© Prizmatix, Israel